Sold per unit. Each wipe measures 5” x 8.5”.
REVO Shaft Finish Maintenance
REVO carbon composite shafts should never be sanded or modified. Sanding the surface of the REVO shaft will damage the exterior finish and weaken the shaft’s structural integrity and release potentially harmful materials that could affect your health. Any sanding, polishing, or treatment of the surface of the shaft with chemicals or abrasives of any kind will void the shaft’s limited-lifetime warranty and negatively affect the shaft’s longevity and performance. Never use talcum powder, baby powder, hand chalk, or other shaft treatments on a REVO carbon fiber composite shaft.
To clean the surface of your REVO carbon composite shaft, you can use one of the following two solutions: REVO Wipes, or Isopropyl Alcohol (90%) cleaning.
Step 1. Wipe the shaft with the included microfiber cleaning cloth, brushing away any lose dirt, dust and debris.
Step 2. Using a REVO wipe or soft cloth towel with a reasonable amount of Isopropyl Alcohol (90%), work up and down the shaft, from the joint end toward the tip while rotating your hand around the shaft’s circumference. You may see dirt on the towelette – this is normal. Continue to work the shaft until all areas have been thoroughly wiped, allowing 1-2 minutes for the surface to dry.