Mijn winkelwagen
  • 0
  • arrow

    Uw winkelwagen is leeg

    Ga direct naar hoofd-inhoud »

    Onze Garantie

    Aanvinken bij dit product te bestellen of Alles selecteren

    Geen produkten geselecteerd.


    OB Pro + Topeind met ring voor 3/8x10 sluiting

    OB Pro + Topeind met ring voor 3/8x10 sluiting
    € 229,00
    Ref: F.OB.PRO+.10SR
    Beschikbaarheid: 3-4 weken

    Reward PointsKoop en verdien 19 Punten K

    OB Pro + Topeind met ring voor 3/8x10 sluiting

    OB Pro + Topeind met ring voor 3/8x10 sluiting

    • Voor een stevige, gedegen afstoot.
    • Diameter Pomerans 11.75mm
    • Beentje: ¼” wiie XTC
    • Conische Taper
    • Ultra-Lage deflectie
    Why Should I Play With an OB shaft?

    The OB shaft provides the optimal combination of the main characteristics that drive your cue's performance:

    Low cue ball deflection:
    "Cue ball deflection" occurs when the cue shaft contacts the cue ball left or right of center (i.e: when you use "English"). Instead of traveling along the center line of the cue, the cue ball will travel down the table at an angle to the line on which the cue is pointing.
    When using side english or spin, "Cue ball deflection" must be compensated for when you are aiming in order to hit the object ball where you want. The more you have to compensate, the more likely you are to miss. Since side english is necessary to play position on the next ball, "Cue ball deflection" is something we all have to deal with.
    "Cue ball deflection" is affected by the weight ratio between the tip end of the cue and the cue ball. Obviously, we can't change the weight of the cue ball, so we focused on the tip end of the shaft. By reducing the weight of the tip end of the shaft, we have reduced the "Cue ball deflection". The OB shafts tests virtually equivalent to the lowest deflection pro taper shaft on the market.
    The fact that, when playing with the OB shaft, you don’t need to worry about deflection is just part of the story. The entire construction has deviated from the conventional path.

    Unlike Pie laminated shafts, the OB shaft is made up from six “stress relieved” segments. Each of these segments is made from straight grained laminated maple and machined in a manner that removes the internal stress to help insure the shaft is straight and stable. These six segments are then assembled into the shaft “blank” that is the start of the OB.

    Radial Uniformity:
    Due to the unique construction of the “blank” for the OB shaft, it provides extremely consistent stiffness no matter how you rotate it. Any Flat Laminated shaft is always stiffer in one direction than the other depending on how it is rotated. What this means for you is that you don’t need to rotate the cue to put a mark on the top before you shoot.

    The pro taper on the OB-2 is longer than most cues. In a normal shaft, this leads to inconsistent cue ball control. Due to the stiffness of the unique construction of the OB, there is no whippy or inconsistent feel. Actually, the longer taper combined with this stiffness gives you the benefit of increased cue ball spin when you need it.

    Good performance and good feel are no longer mutually exclusive. With the OB shaft, you get the performance of low deflection combined with a shaft that feels like a real shaft should feel. Part of that comes from the fact that our shaft is not hollow on the end. The final 4 inches of our shaft is all wood, including the ferrule. The other part of it comes from the use of a high density, vibration dampening foam in the core of the shaft.

    OB Shafts Comparison:
    Garantie Levenslange garantie
    Keu type Topeind
    Sluiting 3/8x10
    Pomerans Everest
    Vorm Conical
    Lengte Topeind 29 inches
    Tip Diameter 11.75 mm
    Geen reviews gevonden